Page | 9
Figure 11
Attach Metal Plates (10) to
Back Splash (C) and
assembled unit from Figure 10
with Medium Bolts (11) and
Washers (2/3).
Tighten Medium Bolts (11) with
Allen Wrench (4).
Figure 12
Now your Mirage Double-Door
Vanity Sink is ready for use.
Adjust foot pad to make unit
level as needed.
Note: Install not included piping
items: faucet, drain, and supply
lines to vanity sink according to
the instructions supplied with
those items.
Installation of faucet, drain, and
supply lines by a certified
plumber is recommended.
