Positioning/Locating Your Electric Fireplace
When choosing a location for your new fireplace, ensure that the general instructions are properly followed.
For best result, install the fireplace out of direct sunlight.
Installation Instructions
Before beginning installation of product make sure all parts are present. Compare parts with package contents list and
drawing above. If any part is missing or damaged, do not attempt to assemble, install or operate the product. Contact
customer service for replacement parts.
Estimated Assembly Time: 15 minutes
Tools Required for Assembly (not included): Phillips screw driver, Drill, Hammer, Leveler
WALL MOUNTING INSTALLATION INSTRUCTIONS
1. Choose a wall location to attach the mounting bracket (E). Position the mounting bracket (E) in the desired location.
Use a leveler to align the bracket and mark the holes locations with a pencil. (One screw must be attached directly
into a wall stud. Wall anchor is not needed for this one screw).
2
．
Put the plastic expansion (B) anchors into the holes, use the screws to mount the plate.
3
．
Fix the L bracket (D) mounting part on the bottom of the fireplace, hang the fireplace on the fixed
mounting plate, mark the correct positions for the two holes on the L bracket (D) mounting part, drill the
holes and put in the expansions anchors, hang on the fireplace and screw securely.
4. Hang the front glass panel for the fireplace.
