SEH utnserver Pro, Быстрое руководство по установке

Страница: 7 / 36

Quick Installation Guide [en] 5

Safety Regulations
UTN servers are network devices for use in office environments. The utnserver
Pro is designed for the integration of USB device into TCP/IP networks.
• Read the documentation and make sure that your system meets the require -
ments listed therein.
• Avoid contact with humidity or liquids.
• The device must only be connected and operated if it is in perfect condition.
• Make sure that no-one steps on or stumbles over the cables.
• If the supplied power cord cannot be used in your country, acquire an appro
-
priate power cord that suits national provisions. For more information, con -
sult your retailer.
• Do not connect a telephone cable to the RJ-45 connector. The RJ-45 connec -
tor may only be connected to SELV voltages. For the connection to the RJ-45
connector only STP cabling (category 5 or better) may be used. The shielding
must fit flushly to the connector.
• Do not open the housing. Unauthorized modifications to the device can af -
fect the product certification and are forbidden.
• The device must not be directly connected to outdoor lines.
• The device must only be operated using the power pack included in the
package.
• Only use a certified USB cable (< 3 m) listed at www.usb.org.
• Electrostatic discharges (ESD) may impair device performance.
• An interruption of the supply voltage may impair device performance or
cause malfunctions.
Important:
Before starting the installation and the initial setup
procedure as well during the operation of the UTN
server, note the following safety regulations. Their
purpose is to protect yourself and others from personal
injuries, and to avoid damage to the equipment.