SEH SU-302, Руководство пользователя

Страница: 14 / 44

11 [en] User Manual

Preparation
If you connect a serial device to a client via SU-302, the driver
installation is the first step.
Then the serial interface will automatically be enumerated as
port on the client. The enumeration is dynamic, i.e. the serial
interface receives the next available port number. Thus it is
also client-specific. The serial device will keep the port
number even if it is removed occasionally but connected back
to the same physical USB interface.
To identify the port numbers that the serial devices
connected via SU-302 receive from the client, you must note
down which port numbers are already allocated before you
start the installation and initial set up of the SU-302. The port
numbers which are added with installation and initial set up
represent the serial devices which are connected via SU-302.
How to proceed depends on the client operating system:
• ’Windows’

11
• ’Linux’

12
Windows
In Windows serial devices are enumerated as COM port
(Communication Port).
1. Open the Device Manager .
2. Select Ports (COM & LPT) .
A list with already created COM and LPT ports is displayed.
3. Note down the COM ports.
Take a screenshot and save or print it.