background image

Symbols and Conventions

BaseLine Print Server User Manual

1-5

1.4 Symbols and Conventions

The following conventions are used in this document:

'Name' Window

The name of menus, files, and windows are marked using single 
quotation marks.

"Name" Section

The name of chapters and sections are marked using double 
quotation marks. In the Acrobat Reader you can jump to the 
corresponding segment by clicking the cross-reference.

y

Eye-catchers mark lists.

9

Hooks mark requirements that must be met before you can begin 
the actual installation.

An arrow marks different possibilities. You can jump to the 
corresponding text section by clicking the text immediately 
following the diamond.

A diamond informs you that several steps must be taken in 
succession. You can jump to the corresponding text section by 
clicking the text immediately following the diamond.

A notice contains information that should be heeded. The notice 
usually contains supplementary information or cross-references to 
other relevant sections in the manual.

A warning contains important information that must be heeded. 
Non-observance may lead to malfunctions.

Содержание SEH650



















































Отзывы: