SEH myUTN-52, Быстрое руководство по установке

Страница: 11 / 32

Quick Installation Guide [en] 11
Assigning an IP Address to the UTN Server
Once the UTN server is connected to the network, it checks whether an IP address
can be obtained from the boot protocols BOOTP or DHCP. If this is not the case,
the UTN server assigns itself an IP address via ZeroConf from the address range
(169.254.0.0/16) which is reserved for ZeroConf.
The UTN servers found by the program will be displayed in the network list. You can
change the TCP/IP parameters of the UTN server.
Proceed as follows:
1. Confirm the note dialog ’Your Selection List seems to be empty’ by clicking
Yes .
(If no note dialog is available and the main dialog appears, select Selection List – Edit
from the menu bar.)
The Edit Selection List dialog appears.
2. Select the UTN server from the network list .
3. Select Set IP Address from the shortcut menu.
The Set IP Address dialog appears.
4. Enter the relevant TCP/IP parameters.
5. Click OK .
The settings are saved.