Appendix - Additional Tool 'utnm'
myUTN User Manual Windows
148
8.6
Additional Tool 'utnm'
utnm
The additional tool 'utnm' has been developed for the myUTN prod-
ucts of SEH Computertechnik GmbH. It is used for the activation and
deactivation of USB ports including connected USB devices.
Use
In order to activate or deactivate a USB port with utnm, commands
are entered and run in a special syntax in the command-line inter-
face of the operating system.
As an alternative, a script will be written for the USB port. The script
contains commands in a special syntax. When it is run, the com-
mands will be executed automatically step by step by the com-
mand-line interpreter.
Benefits and
Purpose
When using utnm, it is not necessary to open and/or install the
interface of the SEH UTN Manager (minimal version of the SEH UTN
Manager
22).
Frequently recurring command sequences (e.g. a port activation) can
be automated by means of scripts. The execution of scripts can be
done automatically (e.g. by means of login scripts).
What Do You Want
To Do?
’Using the Command-Line Interface’
Using the Command-Line Interface
Requirements
The SEH UTN Manager is installed on the client; see:
The IP address or host name of a UTN server is known.
Proceed as follows:
1. Open the Command line interface.
2. Enter the sequence of commands; see ’Syntax and Commands’
3. Confirm your entries.
The sequence of commands will be run.