Segway PT i2 Скачать руководство пользователя страница 36

Страница: 36 / 160

Power/Standby Button Functions

The following functions can be performed using the Power/Standby
button.

Powering On and Off

To power on the Segway PT:
1.

Stand no more than 15 ft. (5m) from your Segway PT.

To power on, tap the Power/Standby button.

To power off, press the Power/Standby button for 2 seconds.

The Segway PT will only power off when no Rider Detect Sensors are
depressed (when there is no weight on the Mats).

Switching to Standby Mode from Balance Mode

Ensure the Segway PT is powered on and in Balance Mode.

To switch to Standby Mode, tap the Power/Standby button.

Confirm that there is no face in the Display and that no Balance
Indicator Lights are flashing.

If all four Balance Indicator lights are green and flashing, the
Segway PT is still in Balance Mode.

See

“Understanding Balance Mode”

in the Getting

Started Manual.

The Segway PT will only accept this command when no Rider Detect
Sensors are depressed (when there is no weight on the Mats).

Содержание PT i2

































































































































































Результаты поиска

Содержание PT i2

Отзывы:

Похожие инструкции для PT i2

Бренды по названию

Популярные бренды

Segway PT i2, Справочное руководство

Результаты поиска

Содержание PT i2

Отзывы:

Похожие инструкции для PT i2

Бренды по названию

Популярные бренды