Segway Personal Transporter i2, Руководство по замене запчастей

Страница: 43 / 126

Segway® Personal Transporter i2, x2, x2 Turf Parts Replacement Guide 4 ‐ 9
To install tire tube:
z
Use only Segway-approved tube (18911-
00001—single; 21193-00001—quantity five).
The 90-degree bend in valve stem is
necessary for proper clearance.
z
To install new tire (use Segway part number
20543-00001), seat outside bead on wheel by
hand before installing tube ( Figure 4-12 ).
1. Make sure Segway PT is powered off and
unplugged.
2. Reminder: Wear safety glasses.
3. Inflate tube with just enough air to give tube
a circular shape ( Figure 4 ‐ 13 ).
Figure 4 ‐ 13: Inflate Tube Until Circular in Shape
4. Align valve stem with opening in rim and
feed tube into tire around rim ( Figure 4 ‐ 14 ).
Make sure there are no kinks, bends, or folds
in tube. Push valve stem through opening in
rim.
Figure 4 ‐ 14: Feed Tube into Tire Around Rim
5. Work outside bead by hand back over rim as
much as possible ( Figure 4 ‐ 15 ).
Figure 4 ‐ 15: Work Outside Bead by Hand
A puncture can occur if tube is pinched between
tire iron and tire bead or rim.