Segway Personal Transporter i2, Руководство по замене запчастей

Страница: 21 / 126

Segway® Personal Transporter i2, x2, x2 Turf Parts Replacement Guide 1 ‐ 5
LeanSteer Frame Removal
To remove LeanSteer frame:
1. Make sure Segway PT is powered off and
unplugged.
Figure 1 ‐ 3: Loosen Fastener Holding LeanSteer Frame
2. Using 5mm hex wrench, remove fastener
holding LeanSteer frame in place. See
Figure 1 ‐ 3 .
3. Move LeanSteer frame all the way to the left
and right until loose. You might hear and
feel a click when wedge clamp assembly
releases from pivot assembly. See Figure 1 ‐ 4 .
4. Slide LeanSteer frame away from pivot
assembly, as shown in Figure 1 ‐ 5 . This
should require minimal force.
Figure 1 ‐ 4: Releasing LeanSteer Frame from Pivot Base
Assembly
If wedge clamps fall out or are removed during
this procedure, put them aside in a safe place as
you will need them to reattach LeanSteer frame
to pivot assembly.
Figure 1 ‐ 5: Remove LeanSteer Frame from Pivot Assembly