7. Specifications / Spéci fi cations
Battery
Pack
Motor
System
Charger
Others
Tires
Max. Payload
Max. Speed
Vehicle
Parameters
Typical Range
*
Traversable Terrain
Max. Slope
Operating Temperature
IP Rating
Battery Type
Charging Time
Nominal Voltage
Charging Temperature
Lithium-ion battery (swappable)
Nominal Energy
Input Voltage
Output Voltage
Output Current
243 lbs (110 kg)
Approx. 19.9 mph (32 km/h)
Vehicle: IPX4: Battery pack·IPX7, motor controller IPX7, IoT IPX7
32–133°F (0–45°C)
32–104°F (0–40°C)
36 V DC
551 Wh
-4–122°F (-20–50°C)
1004 Wh
Motor Type
Brushless DC geared motor
Rated Power
400 W (0.4 kW)
100–240 V AC
Model
NB-42D0-05D0
42 V DC
5 A
Nominal Power
210 W
Approx. 50 mi (80 km)
Paved road
About 4 hours
Approx.14% (8°)
PU filled rubber tire
Dashboard
LED
Frame Material
Aluminum
Front And Rear Fender
PP
Front And Rear Brakes
Drum brake
Applicable Height
5'1– 6'2 ft (155–190 cm)
Item
Parameter
*
Typical Range: tested while riding with full battery, 165 lbs (75 kg) load, 77° F (25°C), 12 mph (20 km/h) on paved road, 90% discharge rate,
ECO Assist mode.
Some of the factors that affect range include rider weight, number of starts and stops, ambient temperature, etc.
Basic
Information
Net Weight
Approx. 84.9 lbs (38.5 kg)
Model
A200/A200T
Product Name
Ninebot Urban E-bike
Dimensions: Length×Width×Height
74 × 25 × 44 in (1885 × 640 × 1115 mm)
This product complies with ANSI/CAN/UL 2849:2020.
This product complies with 16 CFR PART 1512:2019.
The battery complies with UN/DOT 38.3.
The battery complies with ANSI/UL 2271.
Federal Communications Commission (FCC) Compliance Statement for USA
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter
must not be co-located or operating in conjunction with any other antenna or transmitter.
Industry Canada (IC) Compliance Statement for Canada
This device contains licence-exempt transmitter(s) that comply with Innovation, Science and Economic Development
Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
1.This device may not cause interference.
2.This device must accept any interference, including interference that may cause undesired operation of the device.
L’émetteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et
Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée
8 Certifications / Certi fi cations
16
17
aux deux conditions suivantes :
1.L’appareil ne doit pas produire de brouillage;
2.L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre
le fonctionnement.
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This
transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment
should be installed and operated with minimum distance 20cm between the radiator and your body.
Cet équipement est conforme aux limites d'exposition aux radiations IC CNR-102 établies pour un environnement non
contrôlé. Cet émetteur ne doit pas être situé ou fonctionner conjointement avec une autre antenne ou un autre
émetteur. Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre
corps.
Neither Segway Inc. nor Ninebot is responsible for any changes or modifications not expressly approved by Segway Inc.
or Ninebot. Such modifications could void the user's authority to operate the equipment.
Contains FCC ID: XMR201707BG96
FCC ID: YQD-T-PANEL201
Contains IC: XXXXXXXX
IC: XXXXXXXX
