− 6 −
⑦ If the analog lever needs to be calibrated, the following settings screen appears.
If calibration is not needed, the ADVERTISE screen is displayed.
Move both the P1 and P2 analog levers on the control panel as far as they can move around 360
degrees through the up, down, left and right directions.
Be sure to perform the P2 side calibration the same way as the P1 side.
Take care because if the calibration adjustment is not performed correctly, the levers will not
function correctly.
Press the START Button when the configuration is finished and the ADVERTISE screen is
displayed.
CALIBRATION
P1P2
UP8790
DOWN8891
LEFT837F
RIGHT8380
Pleasecarryoutadjustmentoflevers.
MakesurethatyousetupCALIBRATIONon
aleverforboth"PLAYER2"and"PLAYER1".
PleasepressStartButton,ifadjustment
finishes.