8
9
When you reel the fish in close enough, the screen will change to the
Catch screen. A Catch gauge with a red marker will be displayed at the
bottom of the screen. Use the Analog Thumb Pad to control the rod. When
the marker is within the yellow zone, press
A
to successfully catch the fish.
If you fail, you will have to try again.
NOTE:
If you are using a Mad Catz Rumble Rod™, you must press
B
to
successfully catch the fish.
When you successfully catch the fish, the name of the fish you caught and
its weight will be displayed.
You will resume fishing from the Casting Direction Select screen.
At any time during the game (except on the Select Area screen), press the
Start Button to pause the game and display a Pause menu. Use
*@
to
select a menu item. Select BA CK and press
A
(or simply press the Start
Button) to resume the game. Select QUIT to end the game (your action
will be confirmed before quitting).
When you have successfully hooked the fish, reel it in. A Line Tension
Gauge will appear on the right side of the screen. Pay attention to both the
Line Tension Gauge and the action of the fish when reeling it in.
There are three zones on the Line Tension Gauge: green (low), yellow
(medium), and red (high). When there is too much tension on the line, the
gauge will flash, signaling that the line might break, resulting in the fish
escaping. Stop reeling and wait for the tension to decrease. When there is
not enough tension, the fish may unhook and escape. To reel in successful-
ly, control your reeling speed.
By controlling the rod, you can also control the tension from rising too much.
Use the Analog Thumb Pad
$^
to move the rod left and right, and
*@
to
raise and lower the rod. Try to move the rod in the opposite direction to
which the fish is moving.
You will fish until the given time limit. When the time limit nears, a message
will be displayed to indicate this.
CATCH
SUCCESSFUL CATCH
PAUSING THE GAME
TIME LIMIT
FIGHT
SBF2 Manual 7_20.qxp 7/20/01 3:28 PM Page 10
