Step2 – Install DataLink Software
This will install the DataLink software application to your PC.
On the CD is a folder named “Software Installation”. Inside this folder is the file setup.exe. Run
setup.exe and follow the on-screen instructions. When installation is complete, the software may
be launched by selecting “Saturn_DataLink” from the Start Menu. When the DataLink software
starts, it will open a window which will allow you choose the correct com port. Select the radio
button for Bluetooth, and then press OK. After a few seconds, the red LED should stop flashing
and stay on solidly. This solid red LED indication means that the Bluetooth module has
connected successfully.
Step3 – Connecting the Bluetooth Datalink device to the Saturn
The Bluetooth DataLink may stay plugged into the ARP cartridge, even when it is not in use.
1) The Sega Saturn should be powered OFF.
2) Insert a Pro Action Replay cartridge into the Saturn cartridge slot.
3)
Plug the Bluetooth DataLink into the ARP’s 25-pin connector.
4)
Apply power to the Saturn. The Main Menu of the PAR cartridge should display.
5)
Slide the DataLink power switch to ON. The red LED should be blinking.
6)
Start the DataLink software on the PC.
When done using the DataLink, slide the DataLink power switch to OFF, so that the 9V battery
will not be drained.
For instructions on using the DataLink PC Software, see the USB DataLink Guide (Step 4).
Page 5 of 5
