61
5.3.
System Test Mode
•
The contents of settings changed in the TEST mode are stored when the test
mode is finished from EXIT in the menu mode. If the power is turned off before
the TEST mode is finished, the contents of setting change become ineffective.
•
Executing "BACKUP DATA CLEAR" in the SYSTEM TEST MODE does not
clear the BOOKKEEPING data in the GAME TEST mode.
•
Entering the TEST mode clears fractional number of coins less than one credit
and BONUS ADDER data.
•
Perform setting as per specified in this manual for operation. If setting not
specified is performed for operation, proper function of this product may not be
obtained.
In the SYSTEM TEST MODE, IC BD functioning can be checked, the monitor adjusted, and the coin
setting performed.
Refer to NAOMI NETWORK SYSTEM SERIVCE MANUAL for the details. Note that the setting of the
following items need to be performed in accordance with the instruction given.
CABINET TYPE :
1 PLAYER(S)
MONITOR TYPE :
HORIZONTAL
SERVICE TYPE :
COMMON
COIN CHUTE TYPE : COMMON
NETWORK TYPE :
NONE
The SEQUENCE SETTING items of COIN/CREDIT SETTING are as follows.
SEQUENCE SETTING
SEQUENCE 1:
Number of credits required for starting the game.
SEQUENCE 2:
Number of credits required for continuing the play.
SEQUENCE 3:
Number of credits required for dedicated CARD purchase.
SEQUENCE 4 -8:
NOT USED
Press the TEST BUTTON to bring up the screen shown to the left.
Press the SERVICE BUTTON to move downwards through the list. The arrow shows the current selection.
Press the TEST BUTTON to activate the selected test.
To finish TEST MODE, move the arrow to EXIT and press the TEST.
Содержание Outrun 2
