background image

35

The “COIN ASSIGNMENTS” mode permits you to set the start number of credits, as well as
the basic numbers of coins and credits. This mode expresses “how many coins correspond to
how many credits.”

SETTING CHANGE PROCEDURE

Press the SERVICE BUTTON to move the arrow to the desired item.

Choose the desired setting change item by using the TEST BUTTON.

To return to the MENU mode, move the arrow to EXIT and press the TEST BUTTON.

COIN CHUTE TYPE
Sets the combination of the number of COIN
CHUTEs and the number of players as appli-
cable. In the case that the COIN CHUTE is
changed, be sure the setting is made in a manner
meeting the replaced coin chute.

COMMON:
Coins are accepted in common for both players.

INDIVIDUAL:
Each player uses a coin chute which accepts coins
independently.

6 - 9  COIN ASSIGNMENTS

CREDIT TO START
Number of credits required for starting game (1~5 credits are selected.)

CREDIT TO CONTINUE
Number of credits required for continuing game (1~5 credits are selected.)

COIN/CREDIT SETTING
Sets the CREDITS increase increment per coin insertion. There are 27 setings from #1 to
#27, expressed in XX CREDIT as against XX COINS inserted. (TABLE 6.10a, 6.10b) #27
refers to FREE PLAY.
When the COIN CHUTE TYPE is set to INDIVIDUAL, there are some setting numbers
not displayed as indicated in TABLE 6.10b.

MANUAL SETTING
This allows credit increase setting as against coin insertion to be further set in the manner
finer than COIN/CREDIT SETTING (refer to TABLE 6.10c).

1

2

3

Setting changes cannot be stored unless the TEST BUTTON is pressed
while the arrow is on EXIT.

Содержание Magical Truck Adventure










































































































Отзывы: