background image

18

2

3

4

1

5

HOW TO PLAY

Insert a coin.

Coin insertion causes credit(s) to be displayed on the screen. For example, in the case of 2 coins one credits setting,

“INSERT MORE COIN(S)  CREDIT(S)  1/2” is displayed when one coin is inserted.

Inserting one play worht of coin(s) causes “PRESS START BUTTON” to be displayed and START button to flash.

Press START button to have the Mode Select Screen appear on the monitor.

Select the play mode from either BEGINNER or EXPERT Mode in the Mode Select Screen. BEGINNER mode

consisits of 2 areas. In this mode, “instructions” is given during the game play. BEGINNER Mode is suitable for

those who first play this game. EXPERT Mode consists of 4 areas, and is suitable for those who have played this

game before. “Instructions” is not given during the game in the EXPERT Mode.

To select the mode, turn ther Steering Wheel left or right to shift the frame attached to the mode. Step on the

Acelerator Pedal to decide on the mode with the frame being attached.

While the Mode Select is displayed, countdown is executed. Counting down to 0 causes the mode with frame being

attached to be selected automatically.

In case BEGINNER is selected, the monitor proceeds tothe confirmation screen and the play mode to be selected

again. Deciding the play mode causes the Character Select Screen to appear.

In the Character Select Mode, select on-screen player character. Turn the Steering Wheel left or right to shift each

character. Press START button or step on the Accelerator Pedal to decide on the character being displayed.

While the Character Select Mode is displayed, countdown is executed. Counting down to 0 causes the character

being displayed to be selected automatically. Character ability is identical.

When the character is determined, the game starts.

By driving the jeep, move on the field and look for the animal you wish to catch. When you find the animal to aim

at, approach to the animal until sight is appeared on the monitor and throw a rope by inclining the lever to the back.

Zero-in on the animal unitl the rope captures the animal.

Содержание Jambo!Safari



















































































Отзывы: