Sega Grid 42, Руководство пользователя

Страница: 35 / 148

26
ASSEMBL
Y AND
INST
ALLA
TION
6
6-5 COMFIRMATION OF ASSEMBLY
In the test mode, ascertain that the assembly has been made correctly and IC Board is satisfactory.
In the test mode, perform the following test: (refer to chapter 9).
9-2-3 INPUT TEST
This menu is used to test the system inputs such as steering, pedals and buttons. To implement the test, press each
device that is listed and check the results on screen.
9-2-4 OUTPUT TEST
This menu is used to test the system oututs such as Lamps and LED.
9-2-5 COIN SETTINGS
As this system utilises a Credit Board PCB, it is important that the setting remain 1 COIN 1 PLAY. Deveation from
this setting when using the Credit Board PCB can result in unusual credit outputs.
9-2-8 NETWORK TEST
Apply and configure the network of each cabinet (only appiles if 2 or more cabinets are linked).
9-2-9 CALIBRATION TEST
This test is required to calibrated both steering mechanism and control pedals. This procedure is always carried out
at the factory before dispatch. However, certain conditions can have an effect on calibration and it is recommended
that re-calibration be carried out at point of installtion.