Sega Ghost Squad, Руководство пользователя

Страница: 77 / 92

70
www.seuservice.com
FIG. 12 b
CRADLE
10. COIN SELECTOR
The coin selector should be cleaned once every
3 months. When cleaning, follow the procedure
below:
Turn the power for the machine OFF. Open the
coin chute door.
Open the gate and dust off by using a soft brush
(made of wool, etc..).
Remove and clean smears by using a soft cloth
dipped in water or diluted chemical detergent
and then squeezed dry.
Remove the CRADLE.
When removing the retaining ring
(E ring), be very careful so as not to bend the
rotary shaft.
Remove stain from the rotary shaft and shaft re-
ceiving portions by wiping off with a soft cloth,
etc.
After wiping off as per above, further apply
a dry cloth, etc. to cause the coin selector to dry
completely.
CLEANING THE COIN SELECTOR
COIN INSERTION TEST
Once every month, when performing the
Coin SW Test, simultaneously check the
following:
Does the Coin Meter count satisfactorily?
Does the coin drop into the Cashbox cor-
rectly?
Is the coin rejected when inserted while
keeping the Reject Button pressed down?
●
Remove and clean smears by using
a soft cloth dipped in water
or diluted chemical detergent and
then squeezed dry.
●
Never apply machine oil, etc. to the
Coin Selector.
●
After cleaning the Coin Selector,
insert a regular coin in the normal
working status and ensure that the
Selector correctly functions.
FIG. 12 a
FIG. 12 c
GATE
Insert a coin
while keeping the
Reject Button
pressed down and
check if it is rejected.
COIN METER
If the coin is not rejected when the REJECT button is pressed, open the coin chute door and
open the selector gate. After removing the jammed coin, put a normal coin in and check to
see that the selector correctly functions.
HANDLING THE COIN JAM
STOP
IMPORTANT!
1
2
3
4
6
5
5