Sega CAPTO CRANE, Руководство по эксплуатации

Страница: 15 / 25

�
T
ro
u
ble
sh
ootin
g
Fault description and troubleshooting:
When a fault occurs, check the switching power supply. The LED of the
switching power supply in the normal state . If the LED is blinking or dark, the
power supply status is abnormal.
No.
Error description Inspection and troubleshooting
1
The joystick
operates freely but
the crane gantry
does not move.
Check wiring between the joystick and main board.
Check logic voltage for joystick is present and pulls low when
activated
Check voltage is present at the motor when operating the
joystick.
Check PSU voltage
If the above steps do not solve the problem, please contact
Customer service
Press the Get Item
Check if the switch is making good contact
Check the wiring between the switch and main board
Check logic voltage of the switch
2
button does not
activate the drop of
If the above steps do not solve the problem, please contact
Customer service
the claw
3
No display on LCD
Check whether the liquid crystal display wire on the console has
come off
Check whether the plug of the "matrix screen interface" of the
main-board is off
Check whether the two red LEDs on the mainboard are always on.
If not, check the switch
4
No sound
Check whether the system setting volume is set to "O". The
maximum volume is "7".
Check the condition of the wiring between the main board and
potentiometer and potentiometer and speaker
Check the operation of the potentiometer
8