34
ASSEMBL
Y AND
INST
ALLA
TION
6
• Make sure that all the adjusters contact the floor. Otherwise the cabinet could
move, causing an accident.
•
Provide a ventilation space at least 20cm wide behind the cabinet. There are
ventilation holes on the back of the cabinet. Do not block the ventilation holes.
Doing so could trap heat inside resulting in fire. It could also result in equipment
damage or cause parts to become exhausted prematurely.
•
Do not position the product on uneven surfaces or a surface which slopes.
Positioning the cabinet on either an uneven or sloped surface may cause the
cabinet to become unstable which may result in damage or injury.
•
It is NOT possible to place wedges of any kind underneath a cabinet if seats
are being used. Placing wedges underneath a cabinet which uses seats may
provide a pinch or trap area.
The product does not have castors or leg adjuster and relies soley on the floor base for stability.
When fixing the cabinet into location be sure that the cabinet is stable within its enviroment. If the floor is slightly
uneven it may cause the cabinet to rock which may lead to possible injury such as finger or hand jam. In certain
circumstances it may be possible to prevent slight rocking motion by placing a small wedge underneath the base.
6-6 FIXATION TO SITE
In certain circumstances it may be possible
to place a small wedge underneath the base
to prevent slight rocking motion.
