Sega Bass Fishing STD, Руководство пользователя

Страница: 54 / 94

51
When performing such work as monitor installation/removal, or inserting/discon-
necting the external Connector connected to the monitor and its interior, first be
sure to disconnect the power connector (plug). Working with the power plug as is
connected can cause electric shock or malfunctioning.
When replacing the monitor, be very careful. To avoid electric shock, etc., person-
nel other than those who have technical expertise are not allowed to replace the
monitor.
Perform the assembly work by following the procedure herein stated. Failing to
comply with the instructions can cause an electric shock.
Be sure to use 2 or more persons for replacing the monitor. performing the replace-
ment work by only one person can cause injury or parts damage.
To ensure performing the work safely, provide sufficient space. Working in places
with narrow space can cause injury or working errors.
Be careful so as not to damage wirings. Damaged wiring can cause an electric shock
or short circuit accident.
Do not touch places other than those specified. touching places not specified can
cause an electric shock or short cicuit accident.
After the vertical/horizontal transposition of the MONITOR, monitor adjustments may
be required.
For performing the monitor’s vertical/horizontal transposition in the manner consistent with the Game Board, follow
the procedure below:
After turning the AC Panel’s main SW off,
unplug from the Socket Outlet.
Open the Control Panel Base.
Pull the knob in the square hole inside the base
downward. The lock will be unlocked and the
Mask can be removed.
When the Mask is removed, the Connector Plate
appears. If the CRT is positioned horizontally, the
Connector Plate is underneath the CRT, and if the
CRT is positioned vertically, it is on the right
hand side. Disconnect all of the connectors
connected to the Connector Plate.
If the monitor’s video input connector is D-SUB
MINI connector, disconnect by removing the
Maintenance Hatch on the backside of the
cabinet.
Remove the nuts and spring washers which
secure the 4 corners of the monitor.
1
2
3
4
5
10 - 4 REMOVAL/REPLACEMENT OF MONITOR