Connecting the Genesis 32X
If your Genesis set-up appears to the right, see
"Connecting to the Original Genesis Model."
If your Genesis set-up appears to the right, see
"Connecting to the New Genesis Model."
If you own a Genesis CDX, see "Connecting to
the Genesis CDX."
Notes
:
1.
Take care to insert the Genesis 32X between the front and rear electromagnetic shield plates.
2.
The most recent version of the new Genesis model cannot be connected to the original Sega CD model. For further
details, refer to your new Genesis model instruction manual.
Connecting to the Original Genesis Model
Please check the following before you connect your
Genesis 32X to your original Genesis model: ·
•
Is your Genesis properly connected to your TV?
•
When using your Sega CD, is your Genesis
connected properly to your Sega CD?
If you answered 'Yes" to both of the questions, turn the
Power Button OFF, and unplug the AC Adaptors from
the electrical outlets.
1.
Disconnect the Sega Auto RF Switch Box (or Sega
Video Monitor Cable) from the Genesis and TV.
2.
Firmly
insert the Genesis 32X into the cartridge
slot on the Genesis.
3.
Connect the supplied Conversion Cable to the
supplied Connector Cable.
4.
Connect the free end of the Conversion Cable to
the AN OUT Jack on the Genesis. Connect the free
end of the Connector Cable to the AN IN Jack on
the Genesis 32X.
Take care not to plug the
Connector Cable into the A/V OUT Jack on the
Genesis 32X
.
5.
To continue, see "Connecting Your TV".