An LED test is always also executed together with the reset: All LEDs flash in red color for
(approx.) a second, then flash in green color for (approx.) a second.
(8) »★« Key
The “Favorites” key allows for an immediate access to often used menu branches.
For the current Release, there is a fixed list of entries. (It is planned to allow for individual
choices in a later Release.)
RESET
DiggiMEC_Z19
Internal messages
reset
Fault recorder
Measured Values
RESET
Current
Fault rec
Reset
Messages
Select Favorite
(9) »✕« Key
The “Cancel” key aborts parameter changes.
(10) »↵« Key
The »↵« (»Enter«) key can be used to select new parameter values out of a selection
list or value setting dialog. In any other dialogs the »Enter« key is used to store
prepared parameter changes: By pressing the »Enter« key once the parameter changes are
temporarily stored. These settings are marked by an asterisk symbol (“*”) on the display,
they have not been transferred to the WIC1 yet and are therefore not effective yet. If
the »Enter« key is pressed again, those changes are stored definitely.
(11) USB Interface (Smart view Connection)
Connection to the PC software Smart view can be done via this USB-C interface.
Moreover, this is a sufficient power supply for DiggiMEC and WIC1, in case the WIC1 is not
supplied via the CTs or any auxiliary power (WIC1‑4 only).
20
DiggiMEC
DIGGIMEC-1.0-EN-MAN
5 Navigation – Operation
5.1 Front Panel Parts