SEQUENCER WITH
DIFFERENTIAL PRESSURE
SWITCH
Technical brochure
FI 72.0452.0617E
Page 21 / 25
Page manual running :
1 : Adjust the number of cycles to run if manual mode
Declogging cycles in manual mode, are running, without taking into consideration the input I1 or the load loss
measure dP.
The value countdowns, according to the cycles which are achieved.
2 : Choose the SV to activate manually.
3 : If press this area, the SV, indicated by its number, is activated during T1 time.
4 : Display the current protection level.
5 : If press this area : go back to page menu.
4 : If press this area : go back to main page.
5
6
1
2
3
4
