– 7871 - 7872 - 7875 - 7876 –
p.
29
5.3
Lists of measurements and setup library
In order to make easier the recall of data on field, the appliance uses 20 measurement lists of each 50 lines
and 1000 setups.
A setup corresponds to a terrestrial, cable or satellite emission.
A list of measurements corresponds to a particular installation: presence of several satellite dishes, of
various switches
…
The same setup may be used in several measurement lists.
The same installation may use two satellite dishes
ASTRA 19.2 in DiSEqC position A
HOT BIRD 13 in DiSEqC position B
Another one may use three satellite dishes
ATLANTIC BIRD 3 in DiSEqC position A
ASTRA 1 in DiSEqC position B
HOT BIRD in DiSEqC position C
The same setup may be used several times in the same measurement list.
ZDF SatCR slot 0
ZDF SatCR slot 1
ZDF SatCR slot 2
ZDF SatCR slot 3…
If a parameter of a setup changes, for example a modification of rate or change from DVB-S to DVB-S2, only
the setup inside the library should be updated.
These lists and setups may be created on a computer thanks to a spreadsheet and
loaded to the appliance through a USB stick.
A list of measurements is made of:
a list name in 10 characters
the lowest frequency of the LNB (OL1)
the highest frequency of the LNB (OL2)
the selection mode low band / high band of the LNB
Example of list
(the background of the table is white)
Example of library
(the background of the table is yellow)
