Sefa BR 180 PCAS, Инструкция по эксплуатации

Страница: 7 / 20

SEFA
®
France
Page N° 6
Safety devices on the machine:
The security protections and devices should not be modified. They must be put together
again in case of possible removal for maintenance.
They must be kept in place and in good condition during normal operation.
The BR 180 PCAS is equipped with safety devices protecting the operator from any risk of pinching.
The main safety elements are:
The heating plate cover
It is linked to an electronic card by two cables. If one of them happened to be
disconnected, the card would put itself in default and would block the machine.
This cover is positioned so that the heating plate is back inside this one: if the cover meets an obstacle, it will go
back up and will touch the contacts situated on the top before the obstacle hits the heating plate.
If the operator hits the protection cover, the rotation is immediately interrupted and the left light will go on.
To restart the cycle, the operator will have to press on the “Réarmement” button so as to switch the right
light. If this light does not go off, it means that the plate is not in thrust or that the security is not deactivated.
The emergency stop
Situated in the middle of the front: if the operator uses it, it switches the machine off.
Checking of the operation of the safety device:
Try the emergency stop periodically,
Test the cover daily: in touching it, lthe security led on the front should light on.