6
good ventilation and a temperature range of 0
℃
-40
℃
.
Must use the charger supplied by the manufacturer.
Using unauthorized chargers will cause danger.
4. Installation
This tracker is a portable onboard locating device and
needn’t be wired for installation. Four powerful
magnets are built in the back cover of the tracker to
allow the tracker to be securely absorbed on the
surface of any iron metals in a vehicle.
Recommended Position to Arrange the Tracker:
1) Arrange the tracker under the front (rear)
windshield and no shading film and other shielding
objects which screen GPS signals be pasted on the
windshield. Keep the front of the tracker upward.
2) Place the tracker on the vehicle bottom (magnetic
absorption method) such as the flank under the
vehicle door. Never put the tracker near the inside too
much. Otherwise, the tracker cannot receive GPS
signals.
【
Note
】
1) The device should be arranged in a place where
has good GPS signals.
2) The device should be arranged a place where isn’t
subject to corrosion.
3) Do not arrange the device directly in a place with
overhigh temperature, for example, near a heat
radiating tube or exhaust port.
4) When the tracker needs to be absorbed on the