Seeworld S301 Baby Bear Скачать руководство пользователя страница 8

8. Monitor

Monitoring function is only available for 4 specific numbers.
SMS command:

MONITOR#

The device will reply “OK” and dial the specific number which just sent the command. The
owner of the specific number can answer the phone and then enter monitoring state.

9. Appendix

9.1 Safety for the battery

● Please use the original battery. The warranty will be invalid by using any other accessory.
The manufacturer will not take any responsibility if the device get damage.
● The new battery need 2-3 days for charging full power and finishing all power to get the
best condition.
● The battery can get full charge and finish all power over and over hundreds times

When

the battery using time becomes shorter obviously, please change a new one.
● Cut off power supply if not using the charger, don’t charge the battery more than one
week, over charging will reduce the battery using time.
● Do not short-circuit the battery with metal stuff (like the key in your pocket)
● Do not bend or open the battery.
● Do not put the battery into water or fire.
● The battery should be charged at room temperature.
● The battery should never be charged at temperatures of below 0 degrees or above 45
degrees Celsius.

9.2 Use and maintain

Babybear is a high technology product, please use with caution. The advices below can
help you know how to use and maintain the device.
● Keep away the accessory of children’s reach.
● Keep the mobile dry, the water and moisture will corrosion circuit.
● Do not keep or use the mobile in a dusty place.

Do not keep the mobile in heat , it will reduce the mobile using time, damage battery

and plastic accessories.

Do not keep the mobile in low temperatures. When the mobile transfer in high

temperature, the moisture will damage circuit board.

Do not disassemble mobile, non-professionals will damage the device with improper

handing.
● Do not throw, tap, shake the mobile. It may damage the main board.
● Do not clean the mobile with detergents. Use rag to wipe it slowly with soap water.
● Do not paint any color for the mobile. It may affect the mobile working in normal.
● If the mobile get wet, please switch off immediately and take out the battery, keep it for
24 hours, then use after it gets dry.
● It is better turn down the volume and screen backlight for lasting phone standby time.
● Do not put metal parts (except specific charger interface and cable interface) with phone

Содержание S301 Baby Bear













Отзывы: