58
1. Enable QoS and enter Max Throughput (default 20Mbps)
、
Bandwidth Ratio (default H:50
%,
M:30
%,
L:20
%
)
The following table describes the labels in this part.
Label
Description
QoS Enabled
Select this check box to enable quality of service.
Bandwidth Borrowed
Select this check box to allow a rule to borrow unused
bandwidth. Bandwidth borrowing is decided by priority
of the rules. Higher priority will get the remaining
bandwidth first.
Max Throughput
Enter the value of max throughput in kbps that you want
to allocate for one rule. The value should between 1200
kbps and 24000 kbps.
Bandwidth Ratio (H/M/L) You can specify the ratio of priority in these fields. The
range from 1 to 99. The High priority’s ratio should
higher than Medium priority’s ratio and Medium
priority’s ratio should higher than Low priority’s ratio.
Apply Changes
Click this button to save and apply your settings.
