SEERS S23, Руководство по установке, Страница: 13 / 16

10
OPERATING MODE
Earth point must be connected to grounding source
STEP 1: Switch ON MAIN AC SUPPLY (white indicator light ON)
STEP 2: Press + or - button activate heating.
P0 = Off
P1 = Low Temperature
P2 = Medium Temperature
P3 = High Temperature
STEP 3: Turn ON water supply.
STEP 4: For S23P, pump opreation is default, press to off pump. Press ‘pump’ to
activation if needed.
Remarks: Without water supply will stop the heating system and pump operation.
TESTING THE Residual Current Device (RCD)
STEP 1: Press TEST button to test bulid in RCD. Display E1 on
screen.
STEP 2: Press RESET to reset the system and back to normal
operation.
Remarks: As long as incoming main supply is present, the white indicator light is ON.