4
Connecting your LabelWriter Printer:
Do not connect the printer to your computer until after the software installation is complete.
Download and install the latest version of DYMO Label software from
To connect the power
1. Plug the power cord into the power adapter.
2. Plug the power adapter into the power connector on the bottom of the printer.
3. Plug the other end of the power cord into a power outlet.
4. Plug the USB cable into the USB port on the bottom of the printer.
5. Insert the power and USB cables through the cable channel and set the printer down.
6. When the software is completely installed, connect the other end of the USB cable into an
available USB port on your computer.
Содержание Curve LTE
Страница 1: ...Quick Start Guide Curve LTE ...