SeeMeCNC orion delta, Руководство пользователя

Страница: 65 / 104

When it finishes, the layer view will display the first layer of your print job.
You'll notice right off the skirt that I covered previously. It's important to make sure that
the hot end is primed by the time it begins to print your part!
At the bottom of the window you'll see some controls that will allow you to either re-slice
the object ( Generate ) or view the individual print layers.
The controls will show you how many layers are on this object as well as what the layer
number is that you're currently viewing. You can navigate forward and backward through the
layers by using the
>> and << buttons. If you want to jump to a specific layer, you can enter it in
to the box and click Go .
65