DropLit Assembly Guide
Using two screws, fix the Upper T-Slot Mount to the motor mount as shown.
Now it's time to get the aluminum t-
slot extrusion installed into the DropLit
chassis. It's a very straightforward task,
but you need to be careful as to not damage
the lower tower mount as it passes through
it.
Slide the extrusion in from the top as shown below – note that the T-Slot Nuts need to be
oriented vertically so they fit easily in the slots in the extrusion.
Slide the extrusion all the way down until it catches
the T-Slot Nuts at the bottom. Once it does, carefully tap
the extrusion down until it's flush or nearly flush with the
bottom surface of the Tower Base.
36
Fig. 4-39: Attaching the T-Slot Mount.
Fig. 4-40: Installing the extrusion.
Fig. 4-41: Bottom extrusion mount.
Fig. 4-42: Proper T-Slot Extrusion
Depth.
