10
|
SINGLE COMPONENT INSTALLATION (NO ZONES)
Important!
Ensure the heater or cooler is connected and powered
up before proceeding! When prompted, the MagIQtouch Controller
will do a scan to find the component (heater/cooler).
If no component is found, the MagIQtouch Controller will display
the error. Check connections and power and RETRY.
If successful, the MagIQtouch Controller will display what it has
found for confirmation. Selected CONTINUE to proceed to the
operation screen.
Skip now to the ‘OPERATION SCREENS’ chapter.
MULTIPLE COMPONENT INSTALLATIONS
The MagIQtouch Controller uses a ‘System Installation Wizard’ to
assist with the installation process.
The first part of the wizard requires the installer to specify the
type and number of components that will be installed in the
system. This step is important because the MagIQtouch Controller
needs components to be connected and powered up
one at a time
and
in the correct order.
Note!
It is important that components (e.g. heaters, coolers,
sensors etc.) are connected
ONE AT A TIME
as prompted by
the MagIQtouch Controller. If more than one component of the
same device type is connected at the same time there is a risk
of communication corruption and the system will not function
correctly!
The system installation is complete once all components have
been detected.
CONNECTING THE MAGIQTOUCH
CONTROLLER
cont
