Seeley Aira AL Series Скачать руководство пользователя

Страница: 46 / 48

APPENDIX D: WARRANTY INFORMATION

SERVICE DEPARTMENT

Seeley International Pty Ltd

112 O’Sullivan Beach Road

Lonsdale, South Australia 5160

Website: www.seeleyinternational.com

FOR SERVICE

Service call Booking

To book a Service on your Seeley International product Online visit www.seeleyinternational.com and selecting COMMERCIAL

section on the top right hand side of the screen. Then follow these steps:

Step 1

Select

“SUPPORT”

and

“BOOK A SERVICE”.

Step 2

On the

“FIND A SERVICE AGENT”

page, enter your

POSTCODE

and select a category (

“COMMERCIAL -

AIRA

”), select

the “

SEARCH

” button.

Step 3

On the

“RESULTS”

page, select the

“BRAND”

of your cooler.

Step 4

Choose

“SELECT”

for your preferred agent from the list provided.

Step 5

Select

“BOOK A SERVICE”

and complete the required steps and fields.

or Phone 1300 650 644 to be directed to your closest authorised Service Agent.

PRIVACY NOTICE

Seeley International Pty Ltd ABN 23 054 687 035 will use the personal information you provide us with to provide warranty support

for the product you have purchased and to inform you about other products and services. If you choose not to supply us with the

information requested, we may be unable to provide you with warranty support. We may also disclose your information to third

parties, such as related entities; retailers, distributors, service agents and contractors who are affiliated with us; or marketing

or market research companies. If you would prefer not to receive direct marketing communications from us, please follow the

instructions to “unsubscribe” which will be included in the direct marketing communications we send you, or contact our Privacy

Officer using the details set out below. While we do not currently transfer personal information to overseas recipients or store

personal information overseas, if we transfer your information to third parties who do so, we will take reasonable steps to ensure

that the overseas recipients do not breach the

Australian Privacy Principles.

By registering your warranty, you consent to having

your personal information used in this way. Please read our Privacy Policy on our website www.seeleyinternational.com for further

explanation of how we collect, use, hold and disclose personal information, and how you may access and seek correction of your

information. It also sets out how you may complain about a breach of the Australian Privacy Principles, and how we will deal with

your complaint. You may contact us at: Privacy Officer, Seeley International Pty Ltd, 112 O’Sullivan Beach Road, Lonsdale, South

Australia 5160.

Содержание Aira AL Series

















































Результаты поиска

Содержание Aira AL Series

Отзывы:

Похожие инструкции для Aira AL Series

Бренды по названию

Популярные бренды

Seeley Aira AL Series, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Aira AL Series

Отзывы:

Похожие инструкции для Aira AL Series

Бренды по названию

Популярные бренды