SEELEY INTERNATIONAL Braemar, Руководство пользователя, Страница: 9 / 20

7
SEELEY INTERNATIONAL
- OWNER’S MANUAL
OPERATION cont.
TIMER SETTINGS
TIMER ON
The unit can be programmed to turn
on, turn off or a combination of both
when in standby or power ON modes.
Use the below settings.
Press the button to enter
the setup. The icon will disappear
and “ON” will blink on the remote
controller display. Use the
TIMER ON
icon will be displayed.
Press the TIMER OFF button to enter
the setup. The icon will disappear
and “OFF” will blink on the remote
controller display. Use the
icon will be displayed.
or
buttons to adjust the clock time for the
unit to start. Holding these buttons will
produce rapid adjustment.
When complete, press the TIMER ON
button again to set - “ON” will stop
blinking and
Pressing the TIMER ON button again
will CANCEL the TIMER ON function.
or
buttons to adjust the clock time for the
unit to stop.
When complete, press the TIMER OFF
button again to set - “OFF” will stop
blinking and
Pressing the TIMER OFF button again
will cancel the TIMER OFF function.
TIMER OFF
SWING
Press the buttons to adjust the
RIGHT/LEFT
UP/DOWN
louvre, each press will toggle between
the below settings:-
Where a single line indicates a fixed
position, multiple lines indicate
swinging up/down in the positions
shown.
If the louvre is set to OFF (no display)
when swinging, it will remain fixed in
the last position.
X-FAN
The X-FAN function can be used in
COOL or DRY modes, so as to
continue operation of the indoor fan for
an additional 2 minutes after the power
is turned off (so as to remove excess
moisture from the indoor coil).
The icon will be displayed.
Default setting is X-FAN ‘OFF’, and is
not available in AUTO, FAN or HEAT
modes.
CLOSED
CLOSED