
03
02
*
This system send signal by wireless transmission, so it may not receive signal under some certain condition, like interference, error
operation or improper installation. If receiver can't receive signal for 10 minutes, please drive car away from current place ( maybe there is
strong signal interference ) or go to authorized tire repair center to check is there any problem of sensor or battery of sensor is run out(
battery life maybe shorter than normal use, as there is often abnormal condition occurs, sensor need to send signal to warn driver.)
2.1
Operation is not suggested during driving.
2.2
Sensor monitors pressure and temperature of
tire and signal to receiver, receiver reports pressure
and temperature by number and voice. If there is any
abnormal pressure or temperature, flashing warning
icon and voice prompt will notice driver immediately.
Drivers need to check and repair the tire immediately,
in order to avoid risk of accident due to tire problem.
2.3
Tires have natural micro leakage phenomenon. It
is a normal phenomenon that pressure of tire
decreases over time. Pressure decreasing don't have
directly relationship with install this products.
2.4
It is a normal phenomenon that pressure is
unstable due to thermal expansion during driving. It
don't have directly relationship with install this
products.
2.5
Incorrectly installation will affect the use of this
product or make damage. experienced technician is
(2)
Product attention
preferred to install this product. please be careful not
t o d a m a g e t h e s e n s o r t r a n s m i t t e r w h e n
disassembling tires again. Valve of internal sensor is
not available for repeat assembling/disassembling.
2.6
Please use power cable provided by factory. It is
not allowed to tie receiver by power cable, as I will
damage product or effect signal . And you will lose
warranty.
2.7
Most of the DVD or other high power
equipment in the market are all have electromagnetic
interference. In order to avoid electromagnetic
interference, receiver is suggest to install 50CM away
from such kind of products. The best position is
upper left corner, upper right corner of A column and
middle of front seats (away from control)
2.8
There won't be notice if there is any change of
products ( performance, specifications, warranty).
(3)Scope of application
This system is suitable for vehicle with our tires and maximum pressure of tire is below 8 bar,like cars,
commercial vehicles, off-road vehicles, jeeps and minibuses.
*Suggest to check and change valve regularly every year, in order to prevent leakage of tire
.
2
、
Introduction of receiver
①
Power port: connect power cable when charging
②
Buzzer: speaker
③
Menu key: long press into menu setting
④
Select key: select key of menu
④
③
①
②
Figure1
: ①
current pressure of tire
②
current temperature of tire
Figure2
:
All abnormal warning before the fault is not excluded value corresponding to tire display, icons and other
display abnormal information display will continue to flash until troubleshooting or receiver battery runs out. If there are
multiple sensor transmitters, warning, and information display will cycle. After the abnormal alarm, occupants should
immediately reduce speed and find a safe location to check tires and docked to the nearest qualified repair tire repair
plants.
(3)Alarming information
(
Figure2
)
Figure2
Low pressure
of F.R
(2)Display interface
(
Figure
1
)
Figure1
①
②
(1)Key / Port description