SeeEyes SC-MAC02, Руководство пользователя, Страница: 5 / 12

Release Version 2.1
4
3. Product Parts & Peripheral Devices Connection
① HD-Analog Input: HD-Analog signal input port
② Loop Output : Video output & UTC communication port
③ Switch Setting: Terminal Switch
Off Use Loop Output
On Not use Loop Output
④ STATE LED: In case of Power input RED On, In case of Video input GREEN On
⑤ Digital Output: HDMI video output port
⑥ Analog Output: CVBS video output port
⑦ DC 12V Input: DC 12V power input port
※ Terminal Switch setting
• Terminal resistance is adjustable resistance when the video out with using Loop Output port for the
input video which adjust the output video status.
In case of DVR, terminal setting status is ON, therefore when connected to DVR with using Loop
Output port, you should OFF for the terminal setting.
- The default setting is ON.
• If you want to change the terminal setting, please use it after turning it OFF / ON.
• Please make sure to turn the switch ON when the Loop Output is not used.
• If Loop Output is not used, do not connect cable to the Loop Output port.
※ Caution: Be sure to connect only Non-PoC camera (general camera).
If PoC(Power over COAX) camera is connected, it may cause product malfunction.
①
⑤
②
③
④
⑥
⑦