Release Version 2.0
2
Caution (If you do not keep any of the below guidelines, you may get injured or suffer
property loss.)
■ Avoid installation in areas with strong magnetic fields or near wireless devices such as radio
or TV.
- Install the device in a place free from magnetic particles, radio waves or severe vibration.
■ Proper ambient temperature and humidity are recommended.
- Avoid extremely high temperatures(over 50°C) or low(below -10°C), and humid conditions.
■ Do not place heavy items on the product or let foreign substances enter inside the device.
- It may cause failure.
■ Install in well ventilated place, and avoid direct sunlight or heat appliance.
■
Install at a flat and stable place. Do not use an upright or slanted position.
- It may not operate properly or might be dangerous due to the fall of the device.
■ Strong shock or vibration may cause device failure. Be careful when using the device.
- Install in a place without severe vibration.
■ If you notice any unusual noise or smell, unplug the power supply immediately and contact
the place of purchase or service center.
- There may be a risk of fire and electric shock.
■ Rotate the air properly in the system operating room and secure the cover of the main body.
- It may be the cause of failure by environmental factors.
■ Refer the device to the service center and get regular checkup to maintain the performance
of the system.
- We are not responsible for any damages caused by user’s carelessness.
■ Make sure to plug the power cord with grounded outlet.
- There is a risk of electrical shock and personal injury.
■ Place the power plug in a location that is easy to operate.
- If a failure of the product occurred, the power plug must be unplugged to power down completely.
The power button on the main unit does not completely turn off the power.
■ Transmission distance may vary depending on the type of coaxial cable.
■ Do not use this device in close proximity to a device that produces strong waves such as
radio set(TRANCEIVER, Walkie-talkie, etc.) or repeater. It may affect the video signal, or cause
disorders such as noise or crack on the screen.
■ Disconnect the power plug with care during thunder and lightning.
■ Refer to the user’s manual for problems or questions besides the above. Contact our service
center if you need assistance from a professional technician.
■ To extend or terminate the coaxial cables, you should connect them in the following way.
- BNC-M(Male) - BNC-JJ - BNC-M(Male): BNC Connector Connection Example
■ Make the joint part of the cables insulated completely not to expose the metal parts.
