PAGE 9
Traverse Mode
Here is an example of using ‘Traverse’ mode —
where you
can automatically scan through the set of 2.4x GHz or 5x GHz
channels. When using the 2.4x GHz radio module this mode
will automatically traverse channels 1
–
13. When using the
5x GHz radio module this mode with automatically traverse
Wi-Fi channels 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157,
161, 165. There is also a ‘Speed’ option —
when ‘Slow’ is
selected then AirHORN will transmit for 30 seconds before
moving on to the next channel. When ‘Fast’ is selected then
AirHORN will transmit for 5 seconds before moving on to the
next channel. After specifying the ‘Speed’ NEXT and press
ENTER. As with Single mode, the next screen displays the
current band, channel and output power. Pressing the ENTER
key toggles transmission between PAUSED and ACTIVE.
Pulse Mode
Here is an example of using ‘Pulse’ mode —
where you
“burst” on a specific channel, and then ‘off’ for a set interval.
Here the options are channel, burst duration (in seconds)
and ‘off’ interval (in seconds). As with the other AirHORN
modes, the next screen displays the current band, channel
and output power. Pressing the ENTER key toggles
transmission between PAUSED and ACTIVE.
