antenna gain is 2.0dBi.
Label and compliance information When the module is installed in the host
device, the FCC ID label must be visible through a window on the final device
or it must be visible when an access panel, door or cover is easily re
‐
moved. If
not, a second label must be placed on the outside of the final device that
contains the following text: Contains Transmitter Module
FCC ID: Z4T-XIAONRF52840, the FCC ID can be used only when all FCC ID
compliance requirements are met.
Information on test modes and additional testing requirements
The modular transmitter has been fully tested by the module grantee on the
required number of channels, modulation types, and modes, it should not be
necessary for the host installer to re
‐
test all the available transmitter modes or
settings. It is recommended that the host product manufacturer, installing the
modular transmitter, perform some investigative measurements to confirm that
the resulting composite system does not exceed the spurious emissions limits
or band edge limits (e.g., where a different antenna may be causing additional
emissions).
The testing should check for emissions that may occur due to the intermixing
of emissions with the other transmitters, digital circuitry, or due to physical
properties of the host product (enclosure).
