Hardware Overview
Grove interface
Connect main control board such as
Seeeduino
board with driver board.
Hexagonal opening
An opening you pass a knob through.
Parts list
Parts
name
Quantity
Grove
‐
Mouse
Encoder(no
knob
included)
1
PC
Grove
‐
Universal
Cable
1
PC
Get started
This section will show you how to build an IDE environment for building applications
with Grove - Mouse Encoder.
Refer to
Seeeduino V4.2
(It is exchangeable with Arduino board) for how to build a
complete an IDE for your applications, or read
Arduino guide
if you use Arduino original
board.
Notes
1. Duty circle will be bigger if the speed of rotating is slow.
2. The pulse width (PW) will not be the same if rotating speed is not constant.
3. The rotating speed is supposed to be low than 1000 rad/min or it will lead to narrow output
PW or cause damage to this encoder.
4. The output voltage will be uncertain (high or low voltage) for no rotating circumstance since
the position of pulse inside this encoder is not certain.
