Seeed 114991400 Скачать руководство пользователя страница 1

Страница: 1 / 5

Flick HAT Case Assembly

The Flick HAT Case is the prefect enclosure for the Flick HAT.

Step 1

– After removing the protective plastics pull gently out the two sides of the bottom part of the

case to unhook the top.

This should allow you to detach the top cover and easily take a part the case.

Within the case you will find 4 rubber feet and 4 suction cups. Here is how it will look like once
opened.

Содержание 114991400

Страница 1: ...er removing the protective plastics pull gently out the two sides of the bottom part of the case to unhook the top This should allow you to detach the top cover and easily take a part the case Within the case you will find 4 rubber feet and 4 suction cups Here is how it will look like once opened ...

Страница 4: ...Step 4 Push out gently the sides of the bottom part of the case to allow for the white panels to slot back in At this point the Flick HAT is ready to be used ...

Страница 5: ...t how to remove the knock outs for the suction cups please refer to the FAQ below which explains how to it Step 6 Push out gently the sides of the bottom part of the case to allow for the white panels to slot back in At this point the Flick HAT is ready to be used https www pi supply com make flick quick start faq 12 14 17 ...