Seeed 114991400 страница 5 Скачать руководство пользователя

Страница: 5 / 5

Flick HAT Case Assembly With Suction Cups

Step 5

– Install the suction cups on the two white panels.

If you are not sure about how to remove the knock outs for the suction cups please refer to the

FAQ

below

which explains how to it.

Step 6

– Push out gently the sides of the bottom part of the case to allow for the white panels to slot

back in.

At this point the Flick HAT is ready to be used.

https://www.pi

‐

supply.com/make/flick

‐

quick

‐

start

‐

faq/

‐

Содержание 114991400

Страница 1: ...er removing the protective plastics pull gently out the two sides of the bottom part of the case to unhook the top This should allow you to detach the top cover and easily take a part the case Within the case you will find 4 rubber feet and 4 suction cups Here is how it will look like once opened ...

Страница 4: ...Step 4 Push out gently the sides of the bottom part of the case to allow for the white panels to slot back in At this point the Flick HAT is ready to be used ...

Страница 5: ...t how to remove the knock outs for the suction cups please refer to the FAQ below which explains how to it Step 6 Push out gently the sides of the bottom part of the case to allow for the white panels to slot back in At this point the Flick HAT is ready to be used https www pi supply com make flick quick start faq 12 14 17 ...