Seedream X-01, Руководство пользователя, Страница: 5 / 13

BATTERYASSEMBLY
This new model
’ battery is inside of the body of scooter, so don’t need
assembly by customers.(fig.6)
If you need to fix the battery, please open the body like the
picture.(fig.7)
SEATASSEMBLY
1. Put the seat onto the seat post
（
fig.8
）
.
2. Unlock the seat lock level, adjust the seat toward the front and the
lock level will automatically lock the seat.
3. Assemble the left/right armrests respectively into the square tubes
below the seat.
（
see fig.15
）
.
4. Adjust the seat width between the armrests suitable for you, tighten
the knob.
BASKETASSEMBLE
1. Remove the two screws in the tiller
（
fig.9
）
.
2. Assemble the basket holder onto the tiller.
3. Assemble the basket into the holder.
III.ASSEMBLY
IV. COMFORT ADJUSTMENTS
WARNING
！
Pull out the power key before adjustment, never do it
when driving.
SEATHEIGHT
Pull up the seating fixing bar to release the seat. Pull up the seat
（
fig.
8
）
. Remove the latch by pulling the latch-ring outward
（
see fig. 5
）
.
Adjusting the seat height. Reload the latch. Reset the seat.
SEATROTATION
Pull up the seat lock lever to release the seat. Rotate the seat to your
desired direction
（
see fig. 14
）
. Release the seat lock lever, then it will
lock the seat automatically.
ARMRESTWIDTH
Find the fixing screws on the armrest adjusting frame
（
see fig. 15
）
.
Release the screws. Move the armrests outward or inward according
to your favorite width. Refasten the screws.
TILL ANGELADJUSTMENT
Loosen the lock knob on the lower end of the tiller
（
see fig. 4
）
. Adjust
the tiller back and forth according to your favorite angle. Fasten the
knob.
Fig.4 Fig.5