Seeburg TSM Sub dp+, Руководство пользователя

Страница: 8 / 10

TSM Sub dp+
SEEBURG acoustic line
8
Accessing presets:
By pressing the MODE button twice you will gain access to the Preset mode.
Three different presets and an additional cardioid mode can be selected via the
SET button:
•
Low --- Hi: This setting is selected for combining with a connected mid/high
range system ( e.g. TSM12 or A6). The crossover frequency is approximately
120 Hz.
•
Low --- Hi: Preset with a higher crossover frequency for combining with
smaller mid/high range systems ( e.g. TSNano, TSMini). The crossover
frequency is approximately 180 Hz
•
2x Low: Preset for combining with an additional subwoofer ( e.g. TSM Sub)
•
Cardioid Mode: By using this mode the so-called backward attenuation of a
subwoofer system (combination of at least. 2 subwoofers) can be substantially
increased. When the cardioid mode is activated, the TSM Sub dp+ should be
placed in a position that allows the sound to be directed to the rear, whilst a
second subwoofer (active or passive) directs the sound to the front. Special
circuitry produces directional, kidney-shaped (cardioid) sound characteristics.
The best effect is achieved if the TSM Sub dp+ (with activated cardioid mode)
is positioned behind a TSM Sub. The cardioid function operates independently
from the available choice of the three possible presets..
Note : If the TSM Sub dp+ is being used solely as a subwoofer system in
combination with the passive TSM Sub, volume should be adjusted to 0dB.
Lock function:
If the SET and MODE buttons are simultaneously pressed for more than three
seconds, the operational function is disabled. Press the buttons again in the
same way to release the lock.