S-Series
5 Operation
14
5.5.5
EQ Page
1
Input path name
2
User EQ preset name. The preset contains all settings for the seven equalizer filters as
well as the set values for path gain and path delay
3
Filter on/off: Displays the status of each filter. Gray = filter off. Green = filter on. Tapping on
one of the filters selects it for editing.
Its designation (HP, 1…6) then appears in
red
. Tap-
ping a selected filter again turns the filter on or off.
4
Type: Selection menu for assigning a filter type (PEQ, Shelving, Bandpass, Notch, etc.)
5
Freq: Input box for setting the filter (center) frequency
6
Gain: Input box for filter gain boost/cut (if applicable)
7
Q: Input box for setting the filter quality (if applicable).
8
EQ on/bypass: Shows the operating status of the filter section. Lights up green when the
filter section is on, gray when it is bypassed.
P1 Go to Home page
P2 Go to DSP page
P3 Go to Tune page
P4 Go to Utility page
P5 Cancel entries, go to Home page
