GL24 dp
5 Operation
11
HP Mode:
HP Mode should be activated when using additional subwoofers (e.g.
G Sub 1501 dp). The high pass function works regardless of the
choice of three possible presets. If this mode is switched on, the
GL24 dp and the GL system connected to the parallel output are op-
erating in high pass mode.
5.4.2
Preset Bank 2 – Default Settings
This bank contains the recommended settings for GL24 dp systems fitted with the
DPLM
-DSP-
controller.
Flat:
Preset for single application without any subwoofer.
-Low:
Preset with a level reduction of the low-mid range.
(e.g. for 2 GL systems as one line source)
--Low:
Preset with more level reduction of the low-mid range.
(e.g. for 3 GL systems or more as one line source)
HP Mode:
HP Mode should be activated when using additional subwoofers (e.g.
G Sub 1501 dp). The high pass function works regardless of the
choice of three possible presets. If this mode is switched on, the
GL24 dp and the GL system connected to the parallel output are op-
erating in high pass mode.
