HME-PREMIO30-ENG ENGLISH 12/28
-
Press on the emission key => continuous
audible signal (if no signal, contact your
distributor or Sedatelec),
-
Apply the laser beam contact with the test laser
unit.
If the audible signal remains unchanged, this means
that the energy emitted is not within the -20%/+20%
of nominal value band. You should then contact your distributor or
Sedatelec to have your instrument adjusted.
Note: After using, disconnect the
Premio 30 laser duo
test laser in
order that the battery does not discharge.
Starting and operating information
a.
Insert the key
into its socket on the back of the
instrument. Press on the ON/OFF key
.
b.
Checking the battery charge indicator:
-
Slow flashing: recharge recommended
-
Fast flashing: the instrument may stop at any
time; the battery is in urgent need of
recharging.
Important comment
: when switched on, the
Premio 30 laser duo
returns to the configuration for the stimulation mode in last use, in
superficial penetration.